Amphenol RF 132114 has 7 recorded cross-reference matches across 3 manufacturers. Research equivalent, alternate or similar parts using the listed candidates, and check their source notes before selecting a replacement.
Amphenol RF 132114 versus Cinch Connectivity Solutions Johnson 142-0403-011:
Functional alternative for free-hanging cable-mount use. DigiKey lists this exact part as a Direct substitute for Amphenol RF 132114. Manufacturer evidence supports standard SMA straight male, 50 ohm, 12.4 GHz, -65/+165 C and 500 mating cycles, with RG161/174/188/316. Official instructions also list LMR100, not an explicit LMR100A validation. Drawing comparison: body .706 +/- .020 inch (17.93 +/- .51 mm) versus original 16.60 mm reference; candidate copper ferrule versus original brass. Both use .128 inch braid crimp, but candidate center-contact crimp process requires tool 144-0000-910, setting 2, and positioner 141-0000-907 versus original solder center. Follow candidate strip dimensions/instructions; crimp is discouraged on solid center conductors. Original supplied heat shrink is not shown on candidate outline. Length/material/tooling differences are disclosed and do not by themselves exclude functional cable-mount use.
DigiKey lists this exact part as a Similar substitute for Amphenol RF 132114. Taoglas identifies a standard straight SMA male, 50-ohm gold-plated cable connector for RG174/RG316, with 18 GHz listed. Listed as a functional cable-mount alternative with unverified limits, not a full-specification or dimensional drop-in. Necessary exact outline, strip/crimp tooling, temperature range, durability, voltage rating and LMR100A support remain unverified because the linked ConnectorCatalogue.pdf could not be retrieved for review (web size limit and direct HTTP403). Do not inherit the original's environmental/electrical ratings or assembly process without checking the candidate's documentation.
Amphenol RF 132114 versus TE Connectivity 1-1478916-0:
Functional alternative for free-hanging cable-mount use. DigiKey lists this exact part as a Direct substitute for Amphenol RF 132114. Both are standard SMA straight male, 50-ohm cable connectors. TE lists RG174/RG316, -65 to +165 C and a 27 GHz interface rating; exact assembled-cable performance remains cable dependent. Mechanical differences do not exclude functional use: TE body 15.05 +/-0.5 mm versus original 16.60 mm reference, 3.00 versus 3.20 mm ferrule bore, 3.45 mm sleeve crimp versus original .128 inch, stainless body/coupling versus original brass, different cable preparation and TE die 9-1478248-0. Use the candidate's assembly process. RG188 and LMR100A support and correct full product specification/assembly instruction require confirmation. TE catalog marks active but not currently available direct from TE; distributor supply must be checked. This is a functional cross, not a dimensional/tooling drop-in.
Amphenol RF 132114 versus TE Connectivity 2081202-3:
DigiKey lists this exact part as a Similar substitute for Amphenol RF 132114. Distributor specifications identify standard SMA straight male, 50 ohm, solder center/crimp shield, RG174/188/316 and 18 GHz maximum. Functional alternative only within its own ratings: -65 to +85 C, lower maximum temperature than original +165 C; voltage 335 V versus original distributor listing 375 V. Zinc/nickel body and PMP dielectric differ from original gold-plated brass/PTFE. DigiKey marks OBSOLETE/no longer manufactured; marketplace remaining stock is not continuing production. Manufacturer drawing and current manufacturer specifications were not retrieved, so exact assembly/tooling and full performance remain unconfirmed. Suitable only where the reduced temperature/voltage and other differences are acceptable; no LMR100A support established.
Amphenol RF 132114 versus TE Connectivity 6082034-1:
DigiKey lists this exact part as a Direct substitute for Amphenol RF 132114. TE identifies it as a 50-ohm SMA plug for RG174/RG316-family cable. Listed as a functional cable-mount alternative using the distributor's classification, not as independently demonstrated full-specification equivalence. TE marks this part OBSOLETE and unavailable from TE. Remaining distributor inventory may exist; verify supply and suitability before a new design. Exact mechanical outline, cable preparation/tooling, temperature range and complete frequency/voltage comparison have not been established. Do not assume the original's -65/+165 C or 12.4 GHz ratings apply to this part.
TE Connectivity CONSMA007 versus Amphenol RF 132114:
Listed competitor configuration: SMA PLUG STR 50 OHM. SMA Plug Male Pin 50 Ohms Free Hanging (In-Line). Competitive reference for assessment; exact equivalence in quality, specifications, approvals or features is not asserted. Compare current dimensions, interface, gender, impedance, frequency range, mounting, termination, plating and approvals for the application before substitution.
TE Connectivity CONSMA007-G versus Amphenol RF 132114:
Listed competitor configuration: SMA PLUG STR 50 OHM. SMA Plug Male Pin 50 Ohms Free Hanging (In-Line). Competitive reference for assessment; exact equivalence in quality, specifications, approvals or features is not asserted. Compare current dimensions, interface, gender, impedance, frequency range, mounting, termination, plating and approvals for the application before substitution.
Looking for an equivalent or alternate to Amphenol RF 132114? The 7 recorded candidates above link to individual part pages and the evidence behind each relationship.
A recorded cross reference does not establish a drop-in replacement. Compare current datasheets, package or mounting dimensions, pinout, electrical ratings and operating conditions for your application. Similar parts can differ in critical specifications.
Counts describe recorded relationships, not stock, sales, testing or independent qualification. Manufacturer-and-part identities remain separate. Indexing dates do not establish current specifications or availability.
Check current manufacturer documents and electrical, mechanical, environmental and application requirements before selecting a replacement.